REDLINE BRANDS

o Amina    o Artison    o Intuitive    o Custom Cloth Printing    o Velodyne


Amina

Amina iQ Series Accessories


Amina Backbox CV300 Amina Backbox CV300

Whichever speaker you choose, a Backbox can assist in giving consistent audio performance and limit rearward sound transmission

  • Cavity wall and ceilings back box for use with iQ1, iQ2 & iQ3
  • Dimensions: H/W/D 450mm x 306mm x 71.5mm

Reference Code: BackboxCV300

> Datasheet
> Install Guide
> CAD Drawing

Amina Backbox SW300

Whichever speaker you choose, a Backbox can assist in giving consistent audio performance and limit rearward sound transmission

  • Solid wall back box for use with iQ1, iQ2 & iQ3
  • Dimensions: H/W/D 405mm x 308mm x 50mm

Reference Code: BackboxSW300

> Datasheet
> Install Guide
> CAD Drawing

Amina Backbox SW300
Amina APU - APUi10, APUi30 Amina - APUi10, APUi30

Amina Protection Units make sure your speakers are safe and working at their best. Professionally installed panels with an APU are covered under warranty for 10 years in residential properties and 5 years commercial

  • Single channel high-pass filter featuring current sensing with self-resetting fuse protection
  • APUi10 - for use with IQ1 and IQ2
  • APUi30 - for use with IQ3

Reference Code: APUi10, APUi30

Amina APU-RS8i

8 Channel rack mounted version of the Amina Protection Units

  • 8 Channel,19 inch, 1U rack mounted protection unit
  • High-pass filter featuring current sensing with self-resetting fuse protection
  • Works with all panels except AIW750i
  • New 16 Channel APU (below) is available to work with all Amina panels

Reference Code: APU-RS8i

> Datasheet
> Install Guide

Amina APU-RS8i
APU-RS16i Amina APU-RS16i

16 Channel rack mounted version of the Amina Protection Units. Can be used with all Amina residential panels

  • 16 Channel, 19 inch, 1U rack mounted protection unit
  • High-pass filter featuring current sensing with self-resetting fuse protection
  • Works with all panels

Reference Code: APURS/16I

> Install Guide

Amina Firehood 300

Amina's custom-designed firehoods offer an additional 60 minutes of fire protection

  • Compatibility with all Evolution Series, iQ and LFieT Series
  • Fire Tested to BS EN 1363-1: 2012 in various ceiling and floor constructions
  • Fire Hood 300 dimensions 550mm x 320mm x 102mm
  • Retains fire integrity of the ceiling
  • Lightweight and flexible
  • Can be used in plasterboard ceilings and walls

Reference Code: FireHood

> Datasheet

Amina Firehood 300
Shim Kits Amina Shim Kits

For use when Amina speakers are being installed into plasterboard thicker or thinner than the standard 12.5 mm

  • Fit all models. Specify model at point of order
  • Allows correct spacing in plasterboard
  • Check thickness of board before ordering
  • Panel shim kits can be added to allow for up to 30mm of board
  • 9mm board requires backbox shim kit to space back box away from back of plasterboard

Reference Codes:

AMINASHIM300-12MM
AMINASHIM300-1MM
AMINASHIM300-2MM
AMINASHIM300-3MM

Amina Scrim Tape

Recommend tape to be used during the installation process so the plaster adheres better to the panel

  • Alkaline Resistant Glass mesh joint tape
  • Weight - .65gsm
  • Self Adhesive
  • A Whole roll provides coverage for 60-70 panels - 50m long
  • Can be supplied per panel if required

Reference Code: Scrimtape

Amina Scrim Tape
Amina Mounting Blocks Amina Mounting Blocks

Amina blocks are used in installs where backboxes are not used

  • 4 Plastic mounting blocks for use with iQ Developer series, where no back box is used
  • Please advise plasterboard thickness to be used at time of order

Reference Code: AMOUNTBLOCK

Amina Wood - Film

Wood-film is used when Amina speakers are required to be placed onto wood surfaces

  • Adhesive film applied to panel surface to allow product to be bonded to rear of wooden panel
  • Must be ordered at the same time as panel

Reference Code: AWOOD

> Install Guide

Amina Wood Film