REDLINE BRANDS

o Amina    o Artison    o Intuitive    o Custom Cloth Printing    o Velodyne


Amina

Amina iQ Series Accessories


Amina Backbox CV300 Amina Backbox CV300

Whichever speaker you choose, a Backbox can assist in giving consistent audio performance and limit rearward sound transmission

  • Cavity wall and ceilings back box for use with iQ1, iQ2 & iQ3
  • Dimensions: H/W/D 450mm x 306mm x 71.5mm

Reference Code: BackboxCV300

> Datasheet
> Install Guide
> CAD Drawing

Amina Backbox SW300

Whichever speaker you choose, a Backbox can assist in giving consistent audio performance and limit rearward sound transmission

  • Solid wall back box for use with iQ1, iQ2 & iQ3
  • Dimensions: H/W/D 405mm x 308mm x 50mm

Reference Code: BackboxSW300

> Datasheet
> Install Guide
> CAD Drawing

Amina Backbox SW300
Amina Firehood 300 Amina Firehood 300

Amina's custom-designed firehoods offer an additional 60 minutes of fire protection

  • Compatibility with all Evolution Series, iQ and LFieT Series
  • Fire Tested to BS EN 1363-1: 2012 in various ceiling and floor constructions
  • Fire Hood 300 dimensions 550mm x 320mm x 102mm
  • Retains fire integrity of the ceiling
  • Lightweight and flexible
  • Can be used in plasterboard ceilings and walls

Reference Code: FireHood

> Datasheet

Amina Shim Kits

For use when Amina speakers are being installed into plasterboard thicker or thinner than the standard 12.5 mm

  • Fit all models. Specify model at point of order
  • Allows correct spacing in plasterboard
  • Check thickness of board before ordering
  • Panel shim kits can be added to allow for up to 30mm of board
  • 9mm board requires backbox shim kit to space back box away from back of plasterboard

Reference Codes:

AMINASHIM300-12MM
AMINASHIM300-1MM
AMINASHIM300-2MM
AMINASHIM300-3MM

Shim Kits
Amina Scrim Tape Amina Scrim Tape

Recommend tape to be used during the installation process so the plaster adheres better to the panel

  • Alkaline Resistant Glass mesh joint tape
  • Weight - .65gsm
  • Self Adhesive
  • A Whole roll provides coverage for 60-70 panels - 50m long
  • Can be supplied per panel if required

Reference Code: Scrimtape

Amina Mounting Blocks

Amina blocks are used in installs where backboxes are not used

  • 4 Plastic mounting blocks for use with iQ Developer series, where no back box is used
  • Please advise plasterboard thickness to be used at time of order

Reference Code: AMOUNTBLOCK

Amina Mounting Blocks
Amina Wood Film Amina Wood - Film

Wood-film is used when Amina speakers are required to be placed onto wood surfaces

  • Adhesive film applied to panel surface to allow product to be bonded to rear of wooden panel
  • Must be ordered at the same time as panel

Reference Code: AWOOD

> Install Guide