Amina Accessories

amina_cv300 (1).png

 

Amina Backboxes for plasterboard wall

Whichever speaker you choose, a Backbox can assist in giving consistent audio performance and limit rearward sound transmission. All are fitted with composite sound proofing material

CV200 (For Slim-Line Panels)

  • Dimensions: H/W/D (mm) 500 x 206 x 71.5 aluminium back box
  • Use for installation of all 200mm width panels

CV300

  • Cavity wall and ceilings back box for use with iQ1, iQ2 & iQ3
  • Dimensions: H/W/D 450mm x 306mm x 71.5mm

CV345

  • Dimensions: H/W/D (mm) 500 x 351 x 71.5 aluminium back box
  • Use for installation of all 345mm width panels

 

Amina Backboxes for SOLID wall

Whichever speaker you choose, a Backbox can assist in giving consistent audio performance and limit rearward sound transmission. All are fitted with composite sound proofing material

SW200 (For Slim-Line Panels)

  • Dimensions: H/W/D (mm) 455 x 209 x 50 zinc coated steel back box
  • Facilitate speaker installation in solid block, brick and stone wall types
  • Use for installation of all 200mm width panels

SW300

  • Solid wall back box for use with iQ1, iQ2 & iQ3
  • Dimensions: H/W/D 405mm x 308mm x 50mm

SW345

  • Dimensions: H/W/D (mm) 455.4 x 354 x 50 metal back box
  • Use for installation of all 345mm width panels
  • Stainless Steel with soundproofing
amina_sw300.png

 

Amina - APUi10, APUi30, APUI50, APUI70 Single channel protection units

Amina Protection Units make sure your speakers are safe and working at their best. Professionally installed panels with an APU are covered under warranty for 10 years in residential properties and 5 years commercial

  • Single channel high-pass filter featuring current sensing with self-resetting fuse protection
  • APUi10 - for use with IQ1 and IQ2
  • APUi30 - for use with IQ3 and AIW350iN-S200
  • APUi50 - for use with Mobius5, Edge 5 and MobiusDual
  • APUi70 - for use with Mobius7, AIW750iN and Edge 7

For Edge Panels please use the APUi50C and APUi70C

 

Amina APU-RS8i

8 Channel rack mounted version of the Amina Protection Units. Can be used with all Amina residential panels. 

  • 8 Channel,19 inch, 1U rack mounted protection unit
  • High-pass filter featuring current sensing with self-resetting fuse protection
  • Works with all panels

For Edge Panels please use the APU-RS8iC

 

amina_mobius5.png
amina_apu_rs82.png

Amina APU-RS16i

16 Channel rack mounted version of the Amina Protection Units. Can be used with all Amina residential panels.

  • 16 Channel, 19 inch, 1U rack mounted protection unit
  • High-pass filter featuring current sensing with self-resetting fuse protection
  • Works with all panels

For Edge Panels please use the APU-RS16iC

 

Amina FireHood 200 / 345

 

Amina's custom-designed firehoods offer an additional 60 minutes of fire protection

  • Fire Tested to BS EN 1363-1: 2012 in various ceiling and floor constructions
  • Fire Hood 200 for the Evolution slim panels dimensions 600mm x 220mm x 102mm
  • Fire Hood 300 for IQ Panels dimensions 550mm x 320mm x 102mm
  • Fire Hood 345 for Evolution, Mobius and Edge panels dimensions 600mm x 360mm x 102mm
  • Retains fire integrity of the ceiling
  • Lightweight and flexible
  • Can be used in plasterboard ceilings and walls
amina_firehood.png

 

Amina Shim Kits

For use when Amina speakers are being installed into plasterboard thicker or thinner than the standard 12.5 mm

  • Fit all models. Specify model at point of order
  • Allows correct spacing in plasterboard
  • Check thickness of board before ordering
  • Panel shim kits can be added to allow for up to 30mm of board
  • 9mm board requires backbox shim kit to space back box away from back of plasterboard

Amina Scrim Tape

Recommend tape to be used during the installation process so the plaster adheres better to the panel

  • Alkaline Resistant Glass mesh joint tape
  • Weight - .65gsm
  • Self Adhesive
  • A Whole roll provides coverage for 60-70 panels - 50m long
  • Can be supplied per panel if required
amina_scrim_tape.png

 

Amina Mounting Blocks

Amina blocks are used in installs where backboxes are not used

  • 4 Plastic mounting blocks for use where no back box is used.
  • Please advise plasterboard thickness to be used at time of order

 

Amina Wood - Film

Wood-film is used when Amina speakers are required to be placed onto wood surfaces

  • Adhesive film applied to panel surface to allow product to be bonded to rear of wooden panel
  • Must be ordered at the same time as panel
amina_wood_film.png